Developing Better Curb Management Strategies through Understanding Commercial Vehicle Driver Parking Behavior in a Simulated Environment

Three different data types were obtained from Oregon State Driving and Bicycling Simulator Laboratory for purpose of this report and they are as follow:

1. Speed data consists of subject number, average speed, minimum speed, and all the independent variables. Speed data were collected based on the truck’s speed while driving through a certain scenario (out of 24). For each scenario, the average and minimum speed (mph) of 12 drivers were recorded along each segment (scenario) from the start of the road to 150 feet before the intersection (traffic signals).
2. Eye tracking data consists of subject number, total fixation duration (TFD) in milliseconds, area of interest (AOI), and all the independent variables. TFD data were collected while the truck driver maneuvers through a certain scenario (out of 24). For each scenario, the TFD for each AOI was recorded for 11 subjects along each segment (scenario) from the start of the road to 150 feet before the intersection (traffic signals). AOI represent the area of interest that a driver fixates for a certain of time to generate the total fixation duration.
3. Eye tracking data consists of subject number, GSR in peaks per minute, and all the independent variables. GSR data were collected while the truck driver maneuvers through a certain scenario (1 out of 24). For each scenario, the peaks per minute data was recorded for 11 subjects along each segment (scenario) from the start of the road to 150 feet before the intersection (traffic signals). Peaks per minute represents the emotional arousal (i.e., something is scary, threating, joyful, etc.) that a driver generates when reacting to a particular event. Fourteen participants were recruited, two of them had a simulator sickness so they were excluded from the data and the analysis. While there are no quality or consistency issues with this data set, it should be noted that the sample is on the smaller side and that should be considered when interpreting derived results. The average values were calculated to apply robust statistical analysis for such data (speed and lateral position). As the experiment consists of 2x2x2x3 factorial design, each participant had to driver through 24 scenarios; therefore, 288 scenario observations were obtained and recorded in the excel file.